More Seats and Flaps

Slowly the cabin is taking shape. After returning from a cabin in the woods I worked on the cabin in the garage. The seat back hinges were finally riveted to the aft seat pans. Then the seat pans were installed permanently to the center section ribs. Tonight I made all the hinge pins for each of the seats. Two for the bottom of each seat back and one each for the seat back braces.

Up next was the mid-cabin flap actuator brace. It was trimmed to size and drilled for the mounting bolts. A notch was also cut into the baggage tunnel cover where the brace block is installed so you can take the tunnel cover off without having to unmount to the flap hardware.


Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

%d bloggers like this: