Aft Fuse Drilling part 1

I started drilling on the aft fuse tonight. I was tired already from taking the family to GA Day at Paine Field, So I only got part way done with the J-stiffeners. I’ll hit it again tomorrow. I looked at the side skin, F-779 and J-stiffener interfaces and decided to wait on those holes. I am going to remove F-779 and drill those holes separately. I’ll match drill the J-stiffeners in place and then put it all back together.

I didn't like trying to line up all three pieces in these holes, so I will be drilling F-779 separately.

J-stiffeners and F-711 interface. Line up worked out very well.

I was concerned these flange tab holes wouldn't line up when drilled but they turned out pretty well.

Advertisements

Tags: , , , ,

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s


%d bloggers like this: